Maritime Safety Experts
Since 1954
Secure online shopping
Weaver HEAVY DUTY DAVIT SYSTEM HD-RBD201 This is the complete davit hook up allowing you to attach a 10' to 12' inflatable dinghy to the swim platform. Only for hard bottom dinghies.
Reviews: ⭐⭐⭐⭐⭐ Weaver Hypalon CSM Inflatable Boat Glue 1/2 Pint 2-Part glue used on Hypalon/CSM fabric boats to provide an adhesive bond between the fabric and or accessories.
Weaver Industries WEAVERLeaver A motor bracket for leaving your motor on your dinghy when stored on Weaver Davits. 13 inches of clear transom is required. Includes every thing that is needed to install on your dinghy. (Long & Short Push Pins, Pad Eye, Adjustable Rod and mounting hardware)
Weaver PVC Inflatable Boat Glue 1/2 Pint 2-Part glue used on PVC fabric boats to provide an adhesive bond between the fabric and or accessories.
Weaver QUICKKIT QUICK KIT - EASY REMOVAL OF DAVIT HEADS Product #: QUICKKIT Receiver plates for easy removal of the Davit Heads from the swim platform for use with the RBD100 and SSHR for the SD1. Comes with all the mounting hardware plus the pin and lanyard. (Not to be used with RS150)
WEAVER RSH120 STAINLESS STEEL YOKE FOR RP101S Stainless steel yokes that fit into the RP101. This is the part that actually snaps into the davit heads. Sold as a pair.
Weaver Set of four removeable chock Bases CREM Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes. Must be ordered with Chocks at same time and can be added to any set of chocks.
Weaver SNAP DAVIT FOR INFLATABLE DINGHIES FOR SWIMBOARD MOUNT RBD100B Snap Davits for soft or hard bottomed Inflatable dinghies for yachts with Swim Platforms. Comes with Black pads
Weaver SNAP DAVIT FOR INFLATABLE DINGHIES FOR SWIMBOARD MOUNT RBD100G Snap Davits for soft or hard bottomed Inflatable dinghies for yachts with Swim Platforms. Comes with Grey pads
Weaver Standard 6" High Chocks with 3.5x3.5 Pads C1000 A set of 4 universal chocks 6 inches tall for mounting a hard bottomed dinghy on the deck or bridge of a yacht. The pads on these just go back and forth in one direction.
Weaver Standard 6" High Dinghy Chocks with 3.5 x7 Pads C1007 A set of 4 standard chocks 6 inches tall for mounting a hard bottomed dinghy on the deck or bridge of a yacht with 3.5" x 7" pads for the larger dinghies with motors kept on board. These pads just swing back and forth in one direction.
Weaver Standard 6" High Swivel Dinghy Chocks with 3.5 x3.5 Pads C1204 A set of 4 standard chocks 6 inches tall that swivel in any direction and can be adjusted up by using spacer bolts up to 4 inch taller with 3.5"x3.5" pads.
Weaver Standard 6" High Swivel Dinghy Chocks with 3.5 x7 Pads C1207 A set of 4 standard chocks 6 inches tall that swivel in any direction and can be adjusted up by using spacer bolts up to 4 inch taller with 3.5"x7" pads.
Weaver Universal 8" High Dinghy Chocks with 3.5 x7 Pads C1008 A set of 4 universal chocks 8 inches tall for mounting a hard bottomed dinghy on the deck or bridge of a yacht with 3.5"x7" pads. These pads just swing back and forth in one direction.
Weaver Standard 8" High Swivel Dinghy Chocks with 3.5 x7 Pads C1208 A set of 4 standard chocks 8 inches tall that swivel in any direction and can be adjusted up by using spacer bolts up to 4 inch taller with 3.5"x7" pads.